Oven Repair

Oven Repair

 

Ovens are a household essential, and probably one of the most used of your home electronics. Used daily or even multiple times daily, when your oven malfunctions it leaves a stressful time in its wake. Ovens most commonly break or wear out due to prolonged use. They can develop a variety of problems through their lifespan, such as failed to heat.

 

Parts of your oven can also simply become worn out. Many can be easily fixed, but others will require the help of an experienced appliance repair technician to fix. DIY repairs can fix most stove issues, however, and in this article, we’ll be looking at the 3 common stove issues which can be fixed at home.

 

The Top 3 Oven Issues you Might Face

 

Oven Fails to Heat

There are two main reasons as to why your oven isn’t heating up.

 

Reason 1. If the igniter is faulty then you gas oven won’t be able to heat up.

Solution: Test your stovetop burners to see if they are receiving the gas that is needed for ignition. This will help you remove alternative issues, such as those with the gas line which can be more serious. Next, you should set your oven to temperature and listen out for a few clicking sounds before the gas whooshes as it is lit.

 

If you hear more noises than this you should turn the oven off entirely and replace the igniter. Make sure you disconnect the range from the mains. You’ll also need to remove some screws and disconnect a quick-release connection. You can then install the new igniter and put everything back together.

 

Reason 2. Your Electric Ovens’ Elements are Worn Out or Broken

Solution: Check the appearance of your heating elements, and make sure that they are glowing red. If they are not then you’ll need to replace them with the correct component for your make of oven. This is quite easy and only require a knut driver and a screwdriver to complete. You’ll need to disconnect the oven from the mains and then remove the covers, unscrewing any screws that you find. Remove the old component, and replace it with the new. Screw everything back together and reconnect the mains and the repair is done.

 

Your Oven is Heating Up, But at an Incorrect Temperature

If your food is taking longer to cook than usual, or even coming out raw, then it is likely that the oven isn’t heating correctly.

 

Cause 1. Your oven isn’t able to reach the right temperature because the temperature sensor is faulty or is in contact with the oven wall.

Solution: Make sure the temperature sensor isn’t touching the wall of your oven. A temperature sensor in contact with the oven wall isn’t able to measure the correct oven temperature. Therefore, move the sensor away from the wall. If this doesn’t work then you’ll need to take a closer look at the temperature sensor. You’ll need to use an ohmmeter and assess if this part is working correctly.

 

A correctly working temperature sensor will increase in resistance as the oven temperature rises. If faulty it will not be able to do this and will need replacement.

 

Cause 2. The Oven needs to be Recalibrated

Solution: To do this you’ll need an oven thermometer to test how accurate your ovens’ temperature is. Preheat your oven to 350 degrees F and over the next 2 hours take readings every 20 minutes, making a note of your findings.

 

Add up the readings you have made, and then divide the figures you have by the numbers of reads that you have made. This will give you the average temperature. Which you can check for accuracy. If the variance between your preheating figure and your average figure is incorrect then the temperature dial of the oven will need repairing.

 

Oven Cooks Food Unevenly

If your oven doesn’t cook foods through evenly there is a problem that needs repairing.

 

Cause 1: Check your temperature sensor and the heating elements of your oven. If these aren’t working correctly then it is unlikely your food will cook evenly.

Solution: First preheat your oven, and test the heating elements, then check that your temperature sensors’ resistance is increasing as it should. Replace either part if there is an issue.

 

Cause 2. Check over your cookware and the racks you are using to cook with. Different places within the oven can hold different temperatures, as well as differences in make and model having different heats.

Solution: Ensure that you used reflective cookware and baking pans, as this will make sure food cooks evenly, Regularly deep clean your cookware. Learn how your oven works and alter how to cook accordingly. An example of this is rotating your food or changing the shelves that your food is on whilst it cooks.

 

If your problems continue even after trying these hacks then you need to speak to the best in Bedford, TX. Dylan’s Appliance Repair is well regarded as the best in town and will know how to fix your oven no matter its make and model.